International Drive

Orlando has its fair share of resorts, hotels and theme parks. A new hotel is being constructed on International Drive. After finishing the exterior construction and beginning all of the interior work, the contractors were faced with having to add some additional lines into the facility that were not initially planned for. This involved them core drilling through CMU block walls. The engineers were concerned they would cut through too much structural steel in the process. So in order to avoid hitting anything when drilling, they got in contact with Ground Penetrating Radar Systems.

When scanning overhead or on walls, it can be cumbersome and slow to try and use the standard issue 1600MHz antenna. In order to be able to move more quickly and be able to scan in some tighter areas, the GPRS professional assigned to the job used a “palm” antenna which is specifically designed for this. This antenna can scan closer to walls and is ideal when scanning beams and columns.

After arriving on-site, the GPRS professional was able to scan all necessary areas and mark out the rebar layout on the surface of the walls. This enables the contractor to assess the best locations for their core drills to avoid contact with structural steel and keep the engineers happy. Upon completion of the job, the findings were explained to the site contact, at which point, the contractors requested a report to show the engineers and have proof of the locations for their records. The contractor was able to drill all necessary holes without affecting the structural steel in the walls.

You will see a picture below depicting Nate Schmoe, of GPRS, Inc. scanning the CMU block wall surface.

If you would like to receive a proposal for similar work, please visit the “Contact-Us” page at gp-radar.com.
International Drive

Did you like this? Share it:
Share on FacebookTweet about this on TwitterPin on PinterestShare on LinkedInShare on Google+Share on StumbleUponShare on RedditShare on TumblrEmail this to someonePrint this page