Ground Penetrating Radar Systems, Inc. – GPRS – of California was contacted by a construction company to locate rebar and conduit in a slab prior to anchoring equipment in a hospital in Lancaster, CA. We scanned 4 different rooms where they were to anchor medical refrigerators and treadmill walkers. We used tape to mark out rebar per the costumer’s request as we were working on a finished floor. We also used tape to mark out conduit and we wrote “possible conduit” on tape using red crayon to distinguish between rebar and conduit. Using our 1600 MHz antenna we were able to see well into the slab and found several conduits running at angles underneath the rebar at depths of 3”-5”.
Ground penetrating radar is a great tool to scan areas of post tension cables, rebar, and conduits, including PVC pipes and can also be used to locate underground utilities prior to digging or excavating. Please contact Ground Penetrating Radar Systems – GPRS to learn how we can assist with your project. To locate rebar, post tension cables, voids, conduits, pipes or utilities in concrete or underground please contact us today. GPRS has offices throughout the entire state of California and performs GPR surveys throughout the entire state, including cities like Ventura, Santa Barbara, Thousand Oaks, Westlake, Malibu, San Fernando Valley, Los Angeles, Irvine, Glendale, San Diego, Riverside, Pasadena, Torrance, Orange, Anaheim, Long Beach, Lancaster, Palmdale, Bakersfield and San Luis Obispo. Please contact Freddy Espinal at 805-729-5877 or email@example.com to learn more about ground penetrating radar and how GPRS can assist in your projects.
Photos of area we scanned and marked out rebar and conduit. To schedule service or obtain a quote, please contact Freddy Espinal 805-729-5877 or firstname.lastname@example.org.