||This image shows the scanned area; all conduits were labeled with the depth and direction they were heading.
Ground Penetrating Radar Systems, Inc. – GPRS – of California was contacted by a construction company to locate conduit and utilities in the slab prior to saw cutting. We were asked to scan 3’ on both sides of a 20’ long saw cutting path. We marked all findings on the slab with crayon, tape and marker. We also provided depths and a thorough explanation of all findings. We found that in the area we scanned, several conduits were running on angles and varied in depths of 2”-8” deep.
Due to the bank’s business hours, our client asked us to perform our GPR service in the evening/night hours as they are only allowed access during the bank’s closed hours. We used our 1600 MHz antenna and Radio Detection to locate all conduits and utilities.
Ground Penetrating Radar Mapping is a great tool to scan areas of post tension cables, rebar, and conduits, including PVC pipes and can also be used to locate underground utilities prior to digging or excavating. Contact GPRS to learn how we can assist with your next project be it locating rebar, post tension cables, voids, conduits, pipes or utilities in concrete or underground. GPRS has offices throughout California and performs GPR surveys in cities like Ventura, Santa Barbara, Thousand Oaks, Westlake, Malibu, San Fernando Valley, Los Angeles, Irvine, Glendale, San Diego, Riverside, Pasadena, Torrance, Orange, Anaheim, Long Beach, Lancaster, Palmdale, Bakersfield and San Luis Obispo to name a few.
Please contact Freddy Espinal at 805.729.5877 or email@example.com to learn more about Ground Penetrating Radar and how GPRS can assist in your projects.
This image shows a screenshot of the data we received; the red arrow points to a conduit we found at roughly 7” deep and the depth on the bottom right. The yellow arrows point to the rebar at roughly 2” deep. The green arrow points to the bottom of the slab which is roughly 5” thick.